기기를 수리하세요 커뮤니티 상점

Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement

소개

This tutorial shows you the change of only one carbon, to change the second you just have to follow the same method.

필요한 것

  1. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement, Unplug: 1 단계, 이미지 1/1

    • Before you begin, remember to disconnect the mains plug.

    번역하기

  2. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 2 단계, 이미지 1/2 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 2 단계, 이미지 2/2

    • Remove the three screws from the pad.

    번역하기

  3. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 3 단계, 이미지 1/3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 3 단계, 이미지 2/3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 3 단계, 이미지 3/3

    • Be careful to keep the three small marbles.

    번역하기

  4. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 4 단계, 이미지 1/2 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 4 단계, 이미지 2/2

    • Unscrew the screws to open the shell.

    번역하기

  5. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 5 단계, 이미지 1/1

    • Remove the orange cap.

    번역하기

    • Using a screwdriver lift the brushes.

    번역하기

  8. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 7 단계, 이미지 1/3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 7 단계, 이미지 2/3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 7 단계, 이미지 3/3

    • Remove the carbon from its housing then take it out.

    • Using pliers, fold down the small tab.

    번역하기

  9. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 8 단계, 이미지 1/1

    • Replace the new carbon in its carbon holder.

    번역하기

    • Reconnect the carbon, test if the carbon slides well inside.

    번역하기

  11. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 10 단계, 이미지 1/1

    • Replace the coals in their housing.

    번역하기

  12. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 11 단계, 이미지 1/1

    • Before closing, check that no cable is blocked and that each part is in its place.

    • Replace the screws on the hull.

    번역하기

  13. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 12 단계, 이미지 1/3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 12 단계, 이미지 2/3 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 12 단계, 이미지 3/3

    • Replace the retaining flange, be careful to have the three small balls.

    번역하기

  14. Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 13 단계, 이미지 1/2 Dexter 300W Corded Delta Sander - 300DS2.5 Carbon Replacement: 13 단계, 이미지 2/2

    • Tighten the three screws of the retaining plate then that of the pad.

    번역하기
결론

To reassemble follow guide through or in reverse

다음 번역가들에게 특별히 감사 드립니다:

fr en

100%

HelloMacOS

HelloMacOS님은 저희가 세상을 수리하는데 동참하신 분입니다! 기여하시겠습니까?
번역 시작하기 ›

작성자

다른 기여자 1명과 함께

Céline Chemineau

회원 가입일: 01/29/20

16,581 평판

안내서 95개 작성하였습니다

배지: 12

배지 +9개 더

팀

Leroy Merlin Leroy Merlin 회원

Community

36 회원들

안내서 239개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 5

전체 시간: 160