기기를 수리하세요 커뮤니티 상점

Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement

소개

This guide will take you through the steps of replacing the rotor on your device

필요한 것

  1. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement, Unplug: 1 단계, 이미지 1/1

    • Before you begin, remember to disconnect the mains plug.

    번역하기

  2. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 2 단계, 이미지 1/2 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 2 단계, 이미지 2/2

    • Remove the handle from the machine.

    번역하기

  3. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 3 단계, 이미지 1/2 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 3 단계, 이미지 2/2

    • Using a screwdriver or screwdriver, unscrew and open the device.

    번역하기

  4. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 4 단계, 이미지 1/1

    • Unscrew the four screws.

    번역하기

    • Using a screwdriver, lift the spring of the two brushes.

    번역하기

    • Lift the rotor and the stator and disassemble them.

    번역하기

  8. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 7 단계, 이미지 1/2 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 7 단계, 이미지 2/2

    • Disassemble the two parts.

    번역하기

  9. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 8 단계, 이미지 1/1

    • Before reassembling the new part, be sure to re-grease.

    번역하기

  10. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 9 단계, 이미지 1/2 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 9 단계, 이미지 2/2

    • Reassemble the two parts and replace them in their place.

    번역하기

    • Reposition the brush springs.

    번역하기

  12. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 11 단계, 이미지 1/1

    • Then retighten the four screws.

    번역하기

  13. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 12 단계, 이미지 1/2 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 12 단계, 이미지 2/2

    • Before closing, check that no cable is blocked and that each part is in its place.

    • Tighten the screws to close the device.

    번역하기

  14. Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 13 단계, 이미지 1/2 Dexter 900W Corded Hammer Drill - 900ID2.5 Rotor Replacement: 13 단계, 이미지 2/2

    • Finally replace the handle.

    번역하기
결론

By the end of the guide you will have successfully replaced the rotor

To reassemble perform the steps in reverse

다음 번역가들에게 특별히 감사 드립니다:

fr en

100%

HelloMacOS

HelloMacOS님은 저희가 세상을 수리하는데 동참하신 분입니다! 기여하시겠습니까?
번역 시작하기 ›

작성자

다른 기여자 1명과 함께

Céline Chemineau

회원 가입일: 01/29/20

16,581 평판

안내서 95개 작성하였습니다

배지: 12

배지 +9개 더

팀

Leroy Merlin Leroy Merlin 회원

Community

37 회원들

안내서 239개 작성하였습니다

댓글 한 개

Hi,

Nice post and video but where can I purchase a new rotor for my drill?-the 2 links in the post do not work.

Thanks!

Nick Berrow - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 16

30일 전: 37

전체 시간: 478