기기를 수리하세요 커뮤니티 상점

Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement

소개

This guide will show you how to replace the motor in your tool .

필요한 것

  1. Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement, Unplug: 1 단계, 이미지 1/1

    • Before you start, remember to disconnect the outlet from the mains.

    번역하기

  2. Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 2 단계, 이미지 1/1

    • Remove the seal on the back of the device.

    번역하기

  3. Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 3 단계, 이미지 1/3 Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 3 단계, 이미지 2/3 Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 3 단계, 이미지 3/3

    • Unscrew the first screw of the pad.

    • Then unscrew the four remaining screws and pull up to remove it.

    • Finally, remove the screws located on the hull of the device.

    번역하기

    • This step is the same for both carbons.

    • Trap the two carbons to be able to take out the rotor. With a screwdriver to lift them up, then with another screwdriver press the tab.

    • Lift the carbons and with the other tip of the screwdriver, come twist the small paw.

    • Then remove the carbon.

    번역하기

    • Remove the rotor by lifting the frame to be able to retrieve it more easily.

    번역하기

  7. Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 6 단계, 이미지 1/2 Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 6 단계, 이미지 2/2

    • Use a soldering iron to weld the component's rotor.

    • De-solder at the location of the wires.

    • Then remove the wires one by one to remove the component.

    번역하기

  8. Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 7 단계, 이미지 1/1

    • Return the new component to its location.

    • Then unfold the four threads in their place.

    번역하기

  9. Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 8 단계, 이미지 1/3 Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 8 단계, 이미지 2/3 Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 8 단계, 이미지 3/3

    • Replace the rotor in its housing.

    • Unlock the carbons.

    • Replace the cable, the sheath must arrive between the two studs and the sleeve must be positioned in its housing.

    번역하기

  10. Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 9 단계, 이미지 1/2 Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 9 단계, 이미지 2/2

    • Replace the hull of the sander by being careful to properly position the stabilisers in their housing.

    • Finally, remove the screws located on the hull of the device.

    번역하기

  11. Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 10 단계, 이미지 1/3 Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 10 단계, 이미지 2/3 Dexter Wired Multifunction Sander 220W - 220MFS2.5 Engine Replacement: 10 단계, 이미지 3/3

    • Replace the pad by positioning it perfectly in the tips.

    • Screw the four screws.

    • Then the last screw. Finally, put the joint back in its place.

    번역하기
결론

To reassemble follow the steps in reverse.

다음 번역가들에게 특별히 감사 드립니다:

fr en

100%

HelloMacOS

HelloMacOS님은 저희가 세상을 수리하는데 동참하신 분입니다! 기여하시겠습니까?
번역 시작하기 ›

작성자

다른 기여자 1명과 함께

Céline Chemineau

회원 가입일: 01/29/20

16,581 평판

안내서 95개 작성하였습니다

배지: 12

배지 +9개 더

팀

Leroy Merlin Leroy Merlin 회원

Community

36 회원들

안내서 239개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 5

전체 시간: 82