DigiLand DL1010Q Rear Case Replacement - iFixit 수리 안내서

소개

This guide will allow you to access the inside parts of this device

필요한 것

1 단계 Rear Case

DigiLand DL1010Q Rear Case Replacement, Rear Case: 1 단계, 이미지 1/1

With a J00 Philips head screwdriver, unscrew the two 4mm black screws located at the bottom of the device.
Before disassembling your device, be sure it is powered off.

2 단계

DigiLand DL1010Q Rear Case Replacement: 2 단계, 이미지 1/2

DigiLand DL1010Q Rear Case Replacement: 2 단계, 이미지 2/2

Using a plastic opening tool, begin softly prying open device by first inserting it in between the front and back panels.
Continue prying the edges while moving around the device's perimeter until the back can be easily removed.

3 단계

DigiLand DL1010Q Rear Case Replacement: 3 단계, 이미지 1/1

Carefully lift back panel away from the body of the device.
Speaker wires are connected to both the front and back panel.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Tyler Rise

회원 가입일: 09/28/15

335 평판

안내서 2개 작성하였습니다

배지 +11개 더

팀

Eastern Washington University, Team 1-5, Matresse Fall 2015 Eastern Washington University, Team 1-5, Matresse Fall 2015 회원

EWU-MATRESSE-F15S1G5

4 회원들

안내서 10개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 5

전체 시간: 511