소개

Dim or black out the annoying blue LED on a Hesh 2 Wireless headset.

부품

부품은 필요하지 않습니다.

  1. Remove the cushion from both speakers.
    • Remove the cushion from both speakers.

  2. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. On the right speaker, remove the 4 screws shown. Remove the plastic plate , but be careful not to damage the speaker wires.
    • On the right speaker, remove the 4 screws shown.

    • Remove the plastic plate , but be careful not to damage the speaker wires.

  4. On the bottom left of the board, near the power button, are LED0 through LED3. The odd numbered LEDs are blue, and the even numbered LEDs are red.
    • On the bottom left of the board, near the power button, are LED0 through LED3. The odd numbered LEDs are blue, and the even numbered LEDs are red.

    • With the sharpie, carefully mark the tops of the LEDs. Alternatively, if you want to black out the lights entirely, use very small pieces of electrical tape to cover them.

    • It's a good idea to verify the color of each LED by powering on the headset while it's open.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Ian

회원 가입일: 2018년 12월 07일

827 평판

안내서 2개 작성하였습니다

Kid fixers Kid fixers 회원

Community

91 회원들

안내서 52개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 13

전체 시간: 59