소개

This is the beginning process to remove or replace any functional component in the AirPort.

부품

부품은 필요하지 않습니다.

Remove the three 5mm T7 Torx screws from the back panel.
  • Remove the three 5mm T7 Torx screws from the back panel.

댓글 쓰기

Remove one 5mm phillips screw located under the identification sticker.  You will need to remove the sticker or make a hole to get to the screw.
  • Remove one 5mm phillips screw located under the identification sticker. You will need to remove the sticker or make a hole to get to the screw.

댓글 쓰기

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Separate the bottom and top casings.
  • Separate the bottom and top casings.

댓글 쓰기

Remove the metal case from the top case of the AirPort, there are no screws holding it on. Remove the four screws from the metal casing.
  • Remove the metal case from the top case of the AirPort, there are no screws holding it on.

  • Remove the four screws from the metal casing.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Michael Garcia

회원 가입일: 2011년 10월 12일

369 평판

안내서 5개 작성하였습니다

Cal Poly, Team 17-15, Regan Fall 2011 Cal Poly, Team 17-15, Regan Fall 2011 회원

CPSU-REGAN-F11S17G15

3 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 7

전체 시간: 1,627