기기를 수리하세요 커뮤니티 상점

Arnova 7K G3 Rear Cover Replacement

소개

Before replacing any components on the Arnova 7K G3 tablet, disassembly is required. That process starts with removing the rear cover to gain access to a majority of the components including the battery, speaker, and logic board.

필요한 것

  1. Arnova 7K G3 Rear Cover Replacement, Rear Cover: 1 단계, 이미지 1/3 Arnova 7K G3 Rear Cover Replacement, Rear Cover: 1 단계, 이미지 2/3 Arnova 7K G3 Rear Cover Replacement, Rear Cover: 1 단계, 이미지 3/3

    • Remove four 5 mm Phillips #00 screws from each corner of the tablet.

    편집

  3. Arnova 7K G3 Rear Cover Replacement: 2 단계, 이미지 1/2 Arnova 7K G3 Rear Cover Replacement: 2 단계, 이미지 2/2

    • Place the iFixit opening tool in the notches between the cases and pull the covers apart.

    편집

  4. Arnova 7K G3 Rear Cover Replacement: 3 단계, 이미지 1/1

    • Repeat step two until 3/4 of the rear cover is unlatched.

    • Proceed to remove the rear cover by gently pulling it apart by hand.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 6명과 함께

Tyler Sigafoose

회원 가입일: 03/19/15

210 평판

안내서 2개 작성하였습니다

배지: 5

배지 +2개 더

팀

Michigan Tech, Team 1-2, Lauer Spring 2015 Michigan Tech, Team 1-2, Lauer Spring 2015 회원

MTU-LAUER-S15S1G2

2 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 362