주요 콘텐츠로 건너뛰기

Disassembling Beaba Lutin night lamp

필요한 것

  1. Disassembling Beaba Lutin night lamp, Disassembling Beaba Lutin night lamp: 1 단계, 이미지 3개 중 1개 Disassembling Beaba Lutin night lamp, Disassembling Beaba Lutin night lamp: 1 단계, 이미지 3개 중 2개 Disassembling Beaba Lutin night lamp, Disassembling Beaba Lutin night lamp: 1 단계, 이미지 3개 중 3개
    • The lamp opens up at the base: there are two smaller tabs next to the button, the semi-transparent plasic can be pressed in a bit with a knife, put a bit of paper inbetween to prevent the clip from snapping back. Next go with a knife towards one of the large tabs on the side until one side snaps out. Repeat for other side.

  2. Disassembling Beaba Lutin night lamp: 2 단계, 이미지 3개 중 1개 Disassembling Beaba Lutin night lamp: 2 단계, 이미지 3개 중 2개 Disassembling Beaba Lutin night lamp: 2 단계, 이미지 3개 중 3개
    • Remove the 4 screws (warning: 2x2 different types), out comes the pcb. Detach battery connector at the back.

  3. Disassembling Beaba Lutin night lamp: 3 단계, 이미지 3개 중 1개 Disassembling Beaba Lutin night lamp: 3 단계, 이미지 3개 중 2개 Disassembling Beaba Lutin night lamp: 3 단계, 이미지 3개 중 3개
    • remove two more screws to get at the battery

  4. Disassembling Beaba Lutin night lamp: 4 단계, 이미지 1개 중 1개
    • Overview of parts

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

작성자

4다른 기여자 명과 함께

peturdainn

회원 가입일: 07/23/11

580 평판

안내서 4개를 작성함

3가이드 댓글

I think it is easier to open the lamp by pressing the semi-transparent part at the opposite side of the button.

Matthieu Morel - 답글

How can I open the lamp??? Please post a photo of how are u using the knife because I can't!!!

Alberto Santaella Gallego - 답글

you need to press the clips inward, the picture shows where the clips are. Slide inbetween and press

peturdainn - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 8

지난 30일: 43

전체 시간: 4,503