Disassembling Black and Decker BL3000S Blender Base - iFixit 수리 안내서

소개

As a first step to clean, maintain, or install new parts (excluding the blender blades) for the Black and Decker BL3000S the blender base must be taken apart. This guide will provide step by step instructions of how to perform this task.

필요한 것

1 단계 Blender Base

Disassembling Black and Decker BL3000S Blender Base, Blender Base: 1 단계, 이미지 1/2

Disassembling Black and Decker BL3000S Blender Base, Blender Base: 1 단계, 이미지 2/2

Before disassembling the blender base, make sure the blender disconnected from any power outlet.
Lift the jar straight up from the base without tilting the jar.

2 단계

Disassembling Black and Decker BL3000S Blender Base: 2 단계, 이미지 1/1

Remove the top three 1/4 inch base screws using a Philip's head screwdriver.

3 단계

Disassembling Black and Decker BL3000S Blender Base: 3 단계, 이미지 1/2

Disassembling Black and Decker BL3000S Blender Base: 3 단계, 이미지 2/2

Remove the two base leg covers next to the power cord using pliers or a flat-head screwdriver.
This provides access to the base screws beneath.

4 단계

Disassembling Black and Decker BL3000S Blender Base: 4 단계, 이미지 1/1

Remove the following screws that secure the top and bottom halves of the base.
One 1/4 Phillips screw
One TA-20 screw
Both screwdrivers must have a minimum of a three inch shank (length).
Screwdrivers with extenders will not fit down the access holes.

5 단계

Disassembling Black and Decker BL3000S Blender Base: 5 단계, 이미지 1/1

Lift the top half of the base from the bottom half of the base to reveal the internal mechanism.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Andrew

회원 가입일: 10/04/12

209 평판

안내서 4개 작성하였습니다

배지 +7개 더

팀

Cal Poly, Team 6-34, Regan Fall 2012 Cal Poly, Team 6-34, Regan Fall 2012 회원

CPSU-REGAN-F12S6G34

4 회원들

안내서 6개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 7

7일 전: 28

30일 전: 56

전체 시간: 7,662