기기를 수리하세요 커뮤니티 상점

Disassembling Canon EOS Rebel XS Front Cover

소개

Use this guide to replace a damaged front cover or to access the inner parts of the camera.

필요한 것

  1. Disassembling Canon EOS Rebel XS Front Cover, Latch Side Cover: 1 단계, 이미지 1/1

    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

    번역하기

  2. Disassembling Canon EOS Rebel XS Front Cover: 2 단계, 이미지 1/1

    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

    번역하기

  4. Disassembling Canon EOS Rebel XS Front Cover, Disassembling Canon EOS Rebel XS Front Cover: 3 단계, 이미지 1/1

    • Remove three medium length screws from the bottom of the camera

    번역하기

  5. Disassembling Canon EOS Rebel XS Front Cover: 4 단계, 이미지 1/1

    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 8명과 함께

Daniel Bussone

회원 가입일: 01/28/11

1,251 평판

안내서 11개 작성하였습니다

배지: 11

배지 +8개 더

팀

Cal Poly, Team 3-41, Regan Winter 2011 Cal Poly, Team 3-41, Regan Winter 2011 회원

CPSU-REGAN-W11S3G41

2 회원들

안내서 21개 작성하였습니다

댓글 2개

This should be labelled: Easy.

tjt263 - 답글

Okay, there are several steps missing.

tjt263 - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 6

전체 시간: 5,260