기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Disassembling Canon PowerShot SD1100 IS LCD screen

소개

Use this guide to remove the LCD screen.

필요한 것

  1. Disassembling Canon PowerShot SD1100 IS LCD screen, Front and Rear Cover: 1 단계, 이미지 1/2 Disassembling Canon PowerShot SD1100 IS LCD screen, Front and Rear Cover: 1 단계, 이미지 2/2

    • Remove wrist strap and battery.

    번역하기

  2. Disassembling Canon PowerShot SD1100 IS LCD screen: 2 단계, 이미지 1/3 Disassembling Canon PowerShot SD1100 IS LCD screen: 2 단계, 이미지 2/3 Disassembling Canon PowerShot SD1100 IS LCD screen: 2 단계, 이미지 3/3

    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

    번역하기

  3. Disassembling Canon PowerShot SD1100 IS LCD screen: 3 단계, 이미지 1/3 Disassembling Canon PowerShot SD1100 IS LCD screen: 3 단계, 이미지 2/3 Disassembling Canon PowerShot SD1100 IS LCD screen: 3 단계, 이미지 3/3

    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

    번역하기

  4. Disassembling Canon PowerShot SD1100 IS LCD screen: 4 단계, 이미지 1/1

    • The cases should now be removed.

    번역하기

  6. Disassembling Canon PowerShot SD1100 IS LCD screen, LCD screen: 5 단계, 이미지 1/2 Disassembling Canon PowerShot SD1100 IS LCD screen, LCD screen: 5 단계, 이미지 2/2

    • Remove the top-left screw above the LCD screen (0.100 in).

    • Remove the C-shaped plate from the side of the LCD screen.

    번역하기

  7. Disassembling Canon PowerShot SD1100 IS LCD screen: 6 단계, 이미지 1/2 Disassembling Canon PowerShot SD1100 IS LCD screen: 6 단계, 이미지 2/2

    • Remove the screw from the top-right of the LCD screen (0.098 in).

    • Remove the L-shaped bar from the right of the LCD screen.

    번역하기

  8. Disassembling Canon PowerShot SD1100 IS LCD screen: 7 단계, 이미지 1/2 Disassembling Canon PowerShot SD1100 IS LCD screen: 7 단계, 이미지 2/2

    • Use the spudger to remove the L-shaped bar from the left-side of the LCD screen.

    번역하기

  9. Disassembling Canon PowerShot SD1100 IS LCD screen: 8 단계, 이미지 1/1

    • Use tweezers to remove the connector ribbon from the top-left corner above the LCD screen.

    • Be gentle. This ribbon should stay attached to the screen.

    번역하기

  10. Disassembling Canon PowerShot SD1100 IS LCD screen: 9 단계, 이미지 1/3 Disassembling Canon PowerShot SD1100 IS LCD screen: 9 단계, 이미지 2/3 Disassembling Canon PowerShot SD1100 IS LCD screen: 9 단계, 이미지 3/3

    • Use a spudger to lift the connector lock (black flap) at the end of the larger LCD connector ribbon on the front side of the camera.

    • Use the tweezers to lift this ribbon.

    • Use the tweezers to gently peel this ribbon from the one underneath it.

    번역하기

  11. Disassembling Canon PowerShot SD1100 IS LCD screen: 10 단계, 이미지 1/1

    • The LCD screen should now be removed.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 6명과 함께

Tyler Grossheim

회원 가입일: 01/25/11

1,470 평판

안내서 6개 작성하였습니다

배지: 14

배지 +11개 더

팀

Cal Poly, Team 3-32, Regan Winter 2011 Cal Poly, Team 3-32, Regan Winter 2011 회원

CPSU-REGAN-W11S3G32

3 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 8

전체 시간: 3,588