기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Disassembling Canon PowerShot SD850 IS Case Removal

소개

How to remove the outer casing of your Canon PowerShot SD850 IS.

필요한 것

  1. Disassembling Canon PowerShot SD850 IS Case Removal, Battery: 1 단계, 이미지 1/3 Disassembling Canon PowerShot SD850 IS Case Removal, Battery: 1 단계, 이미지 2/3 Disassembling Canon PowerShot SD850 IS Case Removal, Battery: 1 단계, 이미지 3/3

    • Slide the light grey tab toward the edge of the camera using your fingernail.

    • Pull the light grey tab up to open the door.

    • These photos do not show the camera’s memory card or battery, which should be visible inside.

    번역하기

  2. Disassembling Canon PowerShot SD850 IS Case Removal: 2 단계, 이미지 1/2 Disassembling Canon PowerShot SD850 IS Case Removal: 2 단계, 이미지 2/2

    • Slide the small brown tab toward the edge of the camera using your fingernail.

    • Let go of the brown tab when the battery pops up.

    • Grab battery and pull straight up to remove from holder.

    • When inserting the battery, orient it so that the terminals connect.

    번역하기

  3. Disassembling Canon PowerShot SD850 IS Case Removal, Case: 3 단계, 이미지 1/2 Disassembling Canon PowerShot SD850 IS Case Removal, Case: 3 단계, 이미지 2/2

    • Remove the following 4 screws:

    • Two 2.8 mm Phillips #00 at the bottom of the camera.

    • Two 2.75 mm Phillips #00 on the opposite side of the wrist strap.

    번역하기

  5. Disassembling Canon PowerShot SD850 IS Case Removal: 4 단계, 이미지 1/3 Disassembling Canon PowerShot SD850 IS Case Removal: 4 단계, 이미지 2/3 Disassembling Canon PowerShot SD850 IS Case Removal: 4 단계, 이미지 3/3

    • Open the A/V OUT DIGITAL flap on the side of the wrist strap.

    • Remove the 2.75 mm Phillips #00 under the A/V OUT DIGITAL flap on the side of the wrist strap.

    번역하기

  6. Disassembling Canon PowerShot SD850 IS Case Removal: 5 단계, 이미지 1/2 Disassembling Canon PowerShot SD850 IS Case Removal: 5 단계, 이미지 2/2

    • On the bottom of the camera, use your fingernail to slide the light gray tab towards the edge of the camera.

    • Slide light gray door and pull up to open the door.

    • Remove the 8.35 mm Phillips #00 next to the brown tab that holds the battery.

    번역하기

  7. Disassembling Canon PowerShot SD850 IS Case Removal: 6 단계, 이미지 1/2 Disassembling Canon PowerShot SD850 IS Case Removal: 6 단계, 이미지 2/2

    • Gently pull the front cover straight out from the camera. This will expose the wiring on the front of the camera.

    번역하기

  8. Disassembling Canon PowerShot SD850 IS Case Removal: 7 단계, 이미지 1/1

    • Remove the 2.75 mm Phillips #00 next to A/V OUT DIGITAL.

    번역하기

  9. Disassembling Canon PowerShot SD850 IS Case Removal: 8 단계, 이미지 1/1

    • Slide the back casing (with the screen protector) off to reveal the LCD and back wiring.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Peter Tran

회원 가입일: 10/06/10

225 평판

안내서 6개 작성하였습니다

배지: 12

배지 +9개 더

팀

Cal Poly, Team 20-7, Maness Fall 2010 Cal Poly, Team 20-7, Maness Fall 2010 회원

CPSU-MANESS-F10S20G7

6 회원들

안내서 7개 작성하였습니다

댓글 한 개

Had to exchange a battery/SD card cover on an Ixus970IS. This guide very helpful showing the way due to similar layout of the Ixus and the PS850IS! Thanx a lot! :-)

KBK Copenhagen DK

Keld Baden-Kristensen - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 8

전체 시간: 4,211