Skip to main content

소개

The LCD display can be removed and replaced if it is cracked or broken.

부품

No parts specified.

  1. Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen. Remove the 2 screws (4.08 mm) on the other side.  One is located under the rubber USB flap. Remove the last screw (2.59 mm) located on the bottom of the camera.
    • Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen.

    • Remove the 2 screws (4.08 mm) on the other side. One is located under the rubber USB flap.

    • Remove the last screw (2.59 mm) located on the bottom of the camera.

    • Slowly pull the back cover of the camera.

  2. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  3. Remove the screws (2.88 mm) at the top right corner and bottom left corner of the LCD screen. Disconnect the ribbons connecting the screen to the camera. Lift off the screen.
    • Remove the screws (2.88 mm) at the top right corner and bottom left corner of the LCD screen.

    • Disconnect the ribbons connecting the screen to the camera.

    • Lift off the screen.

결론

To reassemble your device, follow these instructions in reverse order.

Ben Tupas

회원 가입일: 2011년 01월 13일

317 평판

안내서 3개 작성하였습니다

Cal Poly, Team 13-3, Forte Winter 2011 Cal Poly, Team 13-3, Forte Winter 2011 회원

CPSU-FORTE-W11S13G3

5 회원들

안내서 8개 작성하였습니다

Hm. "Disconnect the ribbons" resulted in a torn ribbon, and so a dead camera, I think. This also doesn't say how to take the LCD screen out of its frame. Alas.

Maelduin - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 2,160