Disassembling Coby Kyros MID9742 Outer Casing - iFixit 수리 안내서

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

소개

This process is simple and when completed will allow the user to service the components that are located in the interior of the tablet.

필요한 것

1 단계 Outer Casing

Disassembling Coby Kyros MID9742 Outer Casing, Outer Casing: 1 단계, 이미지 1/1

Use a spudger to remove the four rubber screw covers from the four back corners of the tablet.

2 단계

Disassembling Coby Kyros MID9742 Outer Casing: 2 단계, 이미지 1/1

Place the PH00 screwdriver and use it to remove the four 0.5 cm screws from each corner of the tablet.

3 단계

Disassembling Coby Kyros MID9742 Outer Casing: 3 단계, 이미지 1/1

Place a metal spudger tool in between the front and back panels of the tablet and begin to pry the base from the front panel by moving the metal tool around the perimeter of the tablet.
Note that clicking noises will be heard during this process, the panels are assembled well so it may take some force to separate the two panels.
Use caution while prying, do not stick the metal spudger in too far as it may damage internal components

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Ian Swett

회원 가입일: 03/11/15

597 평판

안내서 5개 작성하였습니다

배지 +9개 더

팀

Colorado Springs, Team 5-3, Panko Spring 2015 Colorado Springs, Team 5-3, Panko Spring 2015 회원

UCCS-PANKO-S15S5G3

3 회원들

안내서 12개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 467