주요 콘텐츠로 건너뛰기

부품

지정된 부품이 없습니다.

  1. Place the all in one computer face down on a soft, clean surface to avoid scratching the front. Press the tab on the stand cover and lift up. Press the tab on the stand cover and lift up.
    • Place the all in one computer face down on a soft, clean surface to avoid scratching the front.

    • Press the tab on the stand cover and lift up.

  2. Remove the four phillips screws that attach the stand to the computer. Tilt the stand up and out. Tilt the stand up and out.
    • Remove the four phillips screws that attach the stand to the computer.

    • Tilt the stand up and out.

  3. Starting from the optical drive, pry the back cover up with a plastic spudger. The cover is held in place by fragile plastic clips.  Careful to not break them. The cover is held in place by fragile plastic clips.  Careful to not break them.
    • Starting from the optical drive, pry the back cover up with a plastic spudger.

    • The cover is held in place by fragile plastic clips. Careful to not break them.

결론

To reassemble your device, follow these instructions in reverse order.

다른 24명이 해당 안내서를 완성하였습니다.

Tyler

회원 가입일: 2012년 06월 19일

4,689 평판

안내서 16개 작성하였습니다

TechForce TechForce 회원

Business

2 회원들

안내서 18개 작성하였습니다

I took the back cover off because everytime i connected the power cable the blue light on the power cable would go out and in taking off the back cover i might find something obvious. I did not find anything obvious except for a plastic clip floating around by itself. this may be the cause to a short i am thinking. Any ideas?

kim - 답글

댓글 쓰기

조회 통계:

24 시간 전: 7

7일 전: 37

30일 전: 168

전체 시간: 30,260