Disassembling Garmin Nuvi 370 Into Core Components - iFixit 수리 안내서

소개

This guide walks through the general disassembly of components that are required from installment.

필요한 것

1 단계 Into Core Components

Disassembling Garmin Nuvi 370 Into Core Components, Into Core Components: 1 단계, 이미지 1/2

Disassembling Garmin Nuvi 370 Into Core Components, Into Core Components: 1 단계, 이미지 2/2

Unscrew the two screws on the antenna unit using a torc-head screwdriver.
The Torx-Head Screws' size is T-5, which is about 1.5mm.
Gently pry open the antenna unit with your fingers.
Be careful and try not to damage the small plastic tab.

2 단계

Disassembling Garmin Nuvi 370 Into Core Components: 2 단계, 이미지 1/3

Disassembling Garmin Nuvi 370 Into Core Components: 2 단계, 이미지 2/3

Disassembling Garmin Nuvi 370 Into Core Components: 2 단계, 이미지 3/3

Slide out the inner casing attached to the antenna body.
Remove the rotating joint connecting the antenna casing to the main device:
Squeeze tweezers into the shown location and compress the spring.
Lift out the outer casing while keeping the spring compressed.
watch out, as the spring loaded portion may fly out unexpectedly.

3 단계

Disassembling Garmin Nuvi 370 Into Core Components: 3 단계, 이미지 1/1

Using a torx-head screwdriver, unscrew the two revealed screws that connect the front and back of the device.
The Torx-Head Screws' size is T-5, which is about 1.5mm.

4 단계

Disassembling Garmin Nuvi 370 Into Core Components: 4 단계, 이미지 1/3

Disassembling Garmin Nuvi 370 Into Core Components: 4 단계, 이미지 2/3

Disassembling Garmin Nuvi 370 Into Core Components: 4 단계, 이미지 3/3

Insert the plastic opening tool into the center of the edge as shown in first picture.
Slide the plastic opening tool along the central gap of device, making sure that each edge is free, as shown in the second picture.

5 단계

Disassembling Garmin Nuvi 370 Into Core Components: 5 단계, 이미지 1/3

Disassembling Garmin Nuvi 370 Into Core Components: 5 단계, 이미지 2/3

Disassembling Garmin Nuvi 370 Into Core Components: 5 단계, 이미지 3/3

Detach the front display from the back panel of the device.

6 단계

Disassembling Garmin Nuvi 370 Into Core Components: 6 단계, 이미지 1/2

Disassembling Garmin Nuvi 370 Into Core Components: 6 단계, 이미지 2/2

Using tweezers, gently lift the microphone from its resting position to fully separate the device into two parts.
Finally, remove the screw that connects the motherboard to the back casing with a 3mm head driver.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 7명과 함께

Robert

회원 가입일: 04/19/13

80 평판

안내서 1개 작성함

배지 +4개 더

팀

Cal Poly, Team 13-65, Johann Spring 2013 Cal Poly, Team 13-65, Johann Spring 2013 회원

CPSU-JOHANN-S13S13G65

3 회원들

안내서 6개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,347