주요 콘텐츠로 건너뛰기

부품

지정된 부품이 없습니다.

  1. Flip the GravityLight on its back and place it on a sturdy surface. Unscrew the three 2cm Phillips #00 screws on the back of the GravityLight’s body.
    • Flip the GravityLight on its back and place it on a sturdy surface.

    • Unscrew the three 2cm Phillips #00 screws on the back of the GravityLight’s body.

  2. Some of the internal pieces may loosen or fall out during disassembly.
    • Some of the internal pieces may loosen or fall out during disassembly.

    • Firmly grasp both parts of the GravityLight body and pull them apart.

  3. Place the back panel, the larger of the two pieces, on a sturdy surface with its back down.
    • Place the back panel, the larger of the two pieces, on a sturdy surface with its back down.

    • Unscrew the two 2cm Phillips 00 screws on the inside of the back panel.

  4. Some of the internal pieces may loosen or fall out during disassembly. Firmly grasp both parts of the back panel and pull them apart. Firmly grasp both parts of the back panel and pull them apart.
    • Some of the internal pieces may loosen or fall out during disassembly.

    • Firmly grasp both parts of the back panel and pull them apart.

결론

To reassemble your device, follow these instructions in reverse order.

Brian Gouldsberry

회원 가입일: 2014년 09월 26일

201 평판

안내서 2개 작성하였습니다

Cal Poly, Team 12-2, Forte Fall 2014 Cal Poly, Team 12-2, Forte Fall 2014 회원

CPSU-FORTE-F14S12G2

5 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 44