소개

These instructions will demonstrate how to remove the faceplate from the KDDI Kyocera A5521K.

Turn the phone over to expose the battery cover.
  • Turn the phone over to expose the battery cover.

  • Apply pressure to the back of the battery cover to slide it down.

  • The battery cover is now separate from the phone.

댓글 쓰기

Remove the battery by pushing it up and out from the bottom.
  • Remove the battery by pushing it up and out from the bottom.

  • The battery, cover, and phone should now be separated.

댓글 쓰기

  • Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.

    • Beneath the covers are screws.

댓글 쓰기

  • Remove the screws using a Y0 screwdriver.

댓글 쓰기

  • Use the iPod pry tool to remove the outer screen.

    • Two screws are now visible.

    • Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

댓글 쓰기

  • Use the Y0 screwdriver to remove the screws.

댓글 쓰기

  • Use the iPod pry tool to loosen the faceplate from the phone.

    • Slide the pry tool along the entire crease of the faceplate to completely detach it.

댓글 쓰기

  • Separate the faceplate from the phone.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Dominic Grisafe

회원 가입일: 2010년 04월 15일

133 평판

안내서 10개 작성하였습니다

Cal Poly, Team 28-25, Regan Spring 2010 Cal Poly, Team 28-25, Regan Spring 2010 회원

CPSU-REGAN-S10S28G25

4 회원들

안내서 20개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 2

지난 30일: 4

전체 시간: 1,572