기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Disassembling Kodak Advantix F350 Front Cover

필요한 것

  1. Disassembling Kodak Advantix F350 Front Cover, Back Cover: 1 단계, 이미지 1/1

    • Turn off the camera.

    • Locate the power switch on the front of the camera below the camera lens.

    • Slide the switch to the off position.

    번역하기

  2. Disassembling Kodak Advantix F350 Front Cover: 2 단계, 이미지 1/2 Disassembling Kodak Advantix F350 Front Cover: 2 단계, 이미지 2/2

    • Locate the 3 screws that hold the back cover to the camera.

    • One screw is located on the film opener side of the camera.

    • The other screws are located on the opposite side of the camera.

    번역하기

  3. Disassembling Kodak Advantix F350 Front Cover: 3 단계, 이미지 1/3 Disassembling Kodak Advantix F350 Front Cover: 3 단계, 이미지 2/3 Disassembling Kodak Advantix F350 Front Cover: 3 단계, 이미지 3/3

    • Use the Phillips #00 Precision Screwdriver and remove the screws on the back cover.

    번역하기

  4. Disassembling Kodak Advantix F350 Front Cover: 4 단계, 이미지 1/2 Disassembling Kodak Advantix F350 Front Cover: 4 단계, 이미지 2/2

    • Open the film door to remove the back cover.

    • Slide the film door lever to the left until the film door opens.

    번역하기

  5. Disassembling Kodak Advantix F350 Front Cover: 5 단계, 이미지 1/2 Disassembling Kodak Advantix F350 Front Cover: 5 단계, 이미지 2/2

    • Use a plastic opening tool to pry the case open until a small gap is present.

    • Repeat this process at the top and bottom of the film door to loosen it.

    번역하기

  7. Disassembling Kodak Advantix F350 Front Cover: 6 단계, 이미지 1/3 Disassembling Kodak Advantix F350 Front Cover: 6 단계, 이미지 2/3 Disassembling Kodak Advantix F350 Front Cover: 6 단계, 이미지 3/3

    • Grab the top and bottom of the case firmly as shown.

    • Gently remove the back of the camera case with a slight twisting motion.

    번역하기

  8. Disassembling Kodak Advantix F350 Front Cover, Front Cover: 7 단계, 이미지 1/2 Disassembling Kodak Advantix F350 Front Cover, Front Cover: 7 단계, 이미지 2/2

    • Locate the 3 screws on the camera that hold the front cover of the camera to the camera body.

    • The first 2 are located on the bottom of the camera.

    • The last screw is located behind the flash module.

    • Turn the camera on, and raise the flash module to locate the flash module screw.

    번역하기

  9. Disassembling Kodak Advantix F350 Front Cover: 8 단계, 이미지 1/2 Disassembling Kodak Advantix F350 Front Cover: 8 단계, 이미지 2/2

    • Remove the 2 screws at the base of the camera housing.

    • Use the Phillips #00 Precision Screwdriver and remove the screws.

    • Repeat this process for the screw behind the flash module.

    번역하기

  10. Disassembling Kodak Advantix F350 Front Cover: 9 단계, 이미지 1/2 Disassembling Kodak Advantix F350 Front Cover: 9 단계, 이미지 2/2

    • Remove the screw located under the flash module using the Phillips #00 Precision Screwdriver.

    번역하기

  11. Disassembling Kodak Advantix F350 Front Cover: 10 단계, 이미지 1/2 Disassembling Kodak Advantix F350 Front Cover: 10 단계, 이미지 2/2

    • Remove the flash cover.

    • Remove the flash module by twisting it up and outward of the camera housing.

    • The cover can now be be removed.

    번역하기

  12. Disassembling Kodak Advantix F350 Front Cover: 11 단계, 이미지 1/2 Disassembling Kodak Advantix F350 Front Cover: 11 단계, 이미지 2/2

    • Remove the film door lever.

    • Remove the screw holding the film lever in place by using a Phillips #00 Precision Screwdriver.

    • Using a plastic opening tool, gently pry the switch upwards to remove it.

    번역하기

  13. Disassembling Kodak Advantix F350 Front Cover: 12 단계, 이미지 1/1

    • Open the battery door by pushing the lever towards the arrow indicated.

    번역하기

  14. Disassembling Kodak Advantix F350 Front Cover: 13 단계, 이미지 1/3 Disassembling Kodak Advantix F350 Front Cover: 13 단계, 이미지 2/3 Disassembling Kodak Advantix F350 Front Cover: 13 단계, 이미지 3/3

    • Remove the front cover.

    • Insert your thumb in the film hole and gently pry the bottom loose.

    • Once the front is loose, gently pull it out.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 7명과 함께

David Cottrell

회원 가입일: 10/04/11

88 평판

안내서 5개 작성하였습니다

배지: 10

배지 +7개 더

팀

UW Stout, Team 1-2, Zhou Fall 2011 UW Stout, Team 1-2, Zhou Fall 2011 회원

UWSTOUT-ZHOU-F11S1G2

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 835