Disassembling Marshall MS-2 Micro Amp Case Disassembly - iFixit 수리 안내서

필요한 것

1 단계 Disassembling Marshall MS-2 Micro Amp Case Disassembly

Disassembling Marshall MS-2 Micro Amp Case Disassembly, Disassembling Marshall MS-2 Micro Amp Case Disassembly: 1 단계, 이미지 1/1

First be sure to turn the power switch to the off position.
Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

2 단계

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 2 단계, 이미지 1/3

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 2 단계, 이미지 2/3

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 2 단계, 이미지 3/3

Now remove the battery.
On the back of the device locate the battery cover.
Remove it by pushing down on the clip.
Then pull the piece of fabric until the battery comes out.

3 단계

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 3 단계, 이미지 1/2

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 3 단계, 이미지 2/2

Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.
Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

4 단계

Disassembling Marshall MS-2 Micro Amp Case Disassembly: 4 단계, 이미지 1/1

Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

MacKinley

회원 가입일: 10/22/13

811 평판

안내서 5개 작성하였습니다

배지 +7개 더

팀

University of Maryland, Team 1-1, Shastany Fall 2013 University of Maryland, Team 1-1, Shastany Fall 2013 회원

UMD-SHASTANY-F13S1G1

3 회원들

안내서 5개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 5

전체 시간: 2,041