부품

부품은 필요하지 않습니다.

  1. First be sure to turn the power switch to the off position.
    • First be sure to turn the power switch to the off position.

    • Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

    댓글 쓰기

  2. Now remove the battery.
    • Now remove the battery.

    • On the back of the device locate the battery cover.

    • Remove it by pushing down on the clip.

    • Then pull the piece of fabric until the battery comes out.

    댓글 쓰기

    • Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

    • Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

    댓글 쓰기

    • Use a 9/16" socket to remove the nut around the headphone jack. Be careful to not lose the washer.

    댓글 쓰기

    • Remove the 7/16" phillips head screw.

    댓글 쓰기

    • Grab the headphone jack from inside the case and pull it toward the speaker until you can fully remove it from the device.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

MacKinley

회원 가입일: 2013년 10월 22일

651 평판

안내서 5개 작성하였습니다

University of Maryland, Team 1-1, Shastany Fall 2013 University of Maryland, Team 1-1, Shastany Fall 2013 회원

UMD-SHASTANY-F13S1G1

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 5

지난 30일: 21

전체 시간: 1,058