소개

There are a lot of items behind the dash board of a W123 that may eventually need service, anything from various relays, to one of several vacuum actuators for the climate control vents and flaps.

One way to get easier access to several of these parts is to remove the glove box liner. Learn how here.

부품

부품은 필요하지 않습니다.

  1. Start by opening the glove box.
    • Start by opening the glove box.

    댓글 쓰기

  2. Remove the two phillips screws in the glove box door catch, then remove it.
    • Remove the two phillips screws in the glove box door catch, then remove it.

    댓글 쓰기

    • Gently pry apart the expansion plug in the glove box clips. There will be a row of them on top, and on the bottom.

    • Once you've pried it out part of the way you can pull it the rest of the way out by hand, or gently with needle nose pliers.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • You can then pry the clips out of the liner. Remove them all.

    댓글 쓰기

    • Gently pry down the cover for the glove box lamp.

    댓글 쓰기

    • Now unplug the two connections from the lamp and remove the lamp housing.

    • Be sure to make note of the orientation of the two wires for re-installation.

    댓글 쓰기

    • Now the glove box liner will pull out by hand.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Nicolas Siemsen

회원 가입일: 2013년 12월 06일

29,484 평판

안내서 79개 작성하였습니다

Master Techs Master Techs 회원

Community

279 회원들

안내서 758개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 3

지난 7일: 19

지난 30일: 66

전체 시간: 5,802