주요 콘텐츠로 건너뛰기

소개

There are a lot of items behind the dash board of a W123 that may eventually need service, anything from various relays, to one of several vacuum actuators for the climate control vents and flaps.

One way to get easier access to several of these parts is to remove the glove box liner. Learn how here.

부품

지정된 부품이 없습니다.

  1. Disassembling Mercedes W123 Glove Box Liner, Glove Box Liner: 1 단계, 이미지 1/1
    • Start by opening the glove box.

  2. Disassembling Mercedes W123 Glove Box Liner: 2 단계, 이미지 1/2 Disassembling Mercedes W123 Glove Box Liner: 2 단계, 이미지 2/2
    • Remove the two phillips screws in the glove box door catch, then remove it.

  3. Disassembling Mercedes W123 Glove Box Liner: 3 단계, 이미지 1/2 Disassembling Mercedes W123 Glove Box Liner: 3 단계, 이미지 2/2
    • Gently pry apart the expansion plug in the glove box clips. There will be a row of them on top, and on the bottom.

    • Once you've pried it out part of the way you can pull it the rest of the way out by hand, or gently with needle nose pliers.

  4. Disassembling Mercedes W123 Glove Box Liner: 4 단계, 이미지 1/1
    • You can then pry the clips out of the liner. Remove them all.

  5. Disassembling Mercedes W123 Glove Box Liner: 5 단계, 이미지 1/1
    • Gently pry down the cover for the glove box lamp.

  6. Disassembling Mercedes W123 Glove Box Liner: 6 단계, 이미지 1/1
    • Now unplug the two connections from the lamp and remove the lamp housing.

    • Be sure to make note of the orientation of the two wires for re-installation.

  7. Disassembling Mercedes W123 Glove Box Liner: 7 단계, 이미지 1/1
    • Now the glove box liner will pull out by hand.

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Nicolas Siemsen

회원 가입일: 2013년 12월 06일

37,801 평판

안내서 79개 작성하였습니다

Master Techs Master Techs 회원

Community

307 회원들

안내서 1,127개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 25

30일 전: 98

전체 시간: 9,595