기기를 수리하세요 커뮤니티 상점

Motorola V180 Connector Ribbon Replacement

소개

Disassembling top half to get to connector ribbon, inside screen, and speaker, make sure to approach the next few steps with precision and caution. In the device a ribbon plays a crucial role for the device's function ability and requires careful disassembly of the phone's components.

필요한 것

  1. Motorola V180 Connector Ribbon Replacement, Connector Ribbon: 1 단계, 이미지 1/1

    • Gently tug on the upper edge of the faceplate, and it will easily detach.

    번역하기

  2. Motorola V180 Connector Ribbon Replacement: 2 단계, 이미지 1/1

    • Remove the four screws securing the front cover.

    번역하기

  3. Motorola V180 Connector Ribbon Replacement: 3 단계, 이미지 1/1

    • Gently glide the metallic silver cover outward.

    • This piece is wedged in tight. Try to slide out one hook at a time, instead of both simultaneously.

    번역하기

  4. Motorola V180 Connector Ribbon Replacement: 4 단계, 이미지 1/1

    • Insert a pair of tweezers between the silver and black sections of the cover.

    • The silver section should now easily snap away.

    번역하기

  5. Motorola V180 Connector Ribbon Replacement: 5 단계, 이미지 1/1

    • The black rubber component can now easily be taken off.

    번역하기

  6. Motorola V180 Connector Ribbon Replacement: 6 단계, 이미지 1/1

    • Use a soldering iron to detach the connector ribbon from the phone.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 7명과 함께

Tyler Knisley

회원 가입일: 05/07/10

1 평판

안내서 7개 작성하였습니다

배지: 4

+1개 배지 추가

팀

Cal Poly, Team 6-16, Maness Spring 2010 Cal Poly, Team 6-16, Maness Spring 2010 회원

CPSU-MANESS-S10S6G16

4 회원들

안내서 13개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 2,613