메뉴

설정

내 작업대

귀하의 기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다
내 장바구니

장바구니가 비어 있는 것 같습니다

상점 둘러보기

Disassembling Motorola i90c Internal Backplate

작성자 Grant Glazebrook (또 다른 기여자 6명)
  • 댓글 0
  • 즐겨찾기 0

난이도

쉬움

단계

6

소요 시간

5 - 10 분

섹션

3

플래그

1

Markup Mishap

마크업 사고

해당 안내서는 더 나은 마크업이 필요합니다. 일부 마크업 주석의 편집 또는 작성을 도와주십시오!

소개

This guide details how to remove the internal backplate to expose the speaker, the headphone jack, and the logic board.

도구

해당 도구 구매

부품

부품은 필요하지 않습니다.

  1. Slide the notch downward while pulling the back cover off to remove it. Slide the notch downward while pulling the back cover off to remove it. Slide the notch downward while pulling the back cover off to remove it.

    • Slide the notch downward while pulling the back cover off to remove it.

    편집

  2. Use your fingers to push the battery upward from the bottom. Lift upwards to remove the battery. Lift upwards to remove the battery.

    • Use your fingers to push the battery upward from the bottom.

    • Lift upwards to remove the battery.

    편집

  3. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기

  4. Unscrew the antenna in a counter-clockwise fashion. Remove the aluminum cover.

    • Unscrew the antenna in a counter-clockwise fashion.

    • Remove the aluminum cover.

    편집

  5. Unscrew the 3 screws shown. Lift up the right part of the Nextel logo and unscrew the screw underneath. Lift up the right part of the Nextel logo and unscrew the screw underneath.

    • Unscrew the 3 screws shown.

    • Lift up the right part of the Nextel logo and unscrew the screw underneath.

    편집

  6. DO NOT force the cover off as it could damage the ribbon cable! Gently lift the back cover off.

    • DO NOT force the cover off as it could damage the ribbon cable!

    • Gently lift the back cover off.

    편집

  7. Carefully pry off the connection between the headphone jack and logic board. Carefully pry off the connection between the headphone jack and logic board. Carefully pry off the connection between the headphone jack and logic board.

    • Carefully pry off the connection between the headphone jack and logic board.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 6명과 함께

Grant Glazebrook

회원 가입일: 2010년 04월 14일

7 평판

안내서 2개 작성하였습니다

배지: 5

배지 +2개 더

팀

Cal Poly, Team 29-61, Johann Spring 2010 Cal Poly, Team 29-61, Johann Spring 2010 회원

CPSU-JOHANN-S10S29G61

4 회원들

안내서 6개 작성하였습니다

댓글 0개

의견 추가하세요
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,243