소개

This guide will show you how to remove the logic board from the Nokia 3560.

부품

부품은 필요하지 않습니다.

Press down on the release latch on the bottom of the cover. Once the latch is released, lift the cover from the phone.
  • Press down on the release latch on the bottom of the cover.

  • Once the latch is released, lift the cover from the phone.

댓글 쓰기

Lift the front case off of the phone body.
  • Lift the front case off of the phone body.

댓글 쓰기

Lift the keypad off of the phone. Lift the keypad off of the phone.
  • Lift the keypad off of the phone.

댓글 쓰기

Mac RAM 키트
Mac 속도를 높이십시오. 메모리를 최대한 활용하십시오.
Mac RAM 키트
Mac에서 메모리를 더 많이 확보하십시오.
The screen is held to the body by six screws.
  • The screen is held to the body by six screws.

댓글 쓰기

Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).
  • Unscrew the six screws with a Torx screwdriver (six-pointed star shaped bit).

댓글 쓰기

Insert a flat screwdriver between the black body and plastic layer. Insert a flat screwdriver between the black body and plastic layer.
  • Insert a flat screwdriver between the black body and plastic layer.

댓글 쓰기

Pry the layers apart. The LCD and plastic layer will lift out as one piece.
  • Pry the layers apart. The LCD and plastic layer will lift out as one piece.

댓글 쓰기

With the screws removed, the logic board can then be lifted out of the body by hand.
  • With the screws removed, the logic board can then be lifted out of the body by hand.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Sam Ryan

회원 가입일: 2010년 04월 18일

1 평판

안내서 16개 작성하였습니다

Cal Poly, Team 30-39, Garner Spring 2010 Cal Poly, Team 30-39, Garner Spring 2010 회원

CPSU-GARNER-S10S30G39

5 회원들

안내서 16개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 1,725