주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Disassembling Nokia Classic 2600c-2b Phone

필요한 것

  1. Disassembling Nokia Classic 2600c-2b Phone, Phone: 1 단계, 이미지 1/2 Disassembling Nokia Classic 2600c-2b Phone, Phone: 1 단계, 이미지 2/2
    • Press down on the button located at the bottom of the phone, using the center ridge as a guide.

    • Pull the phone apart from the bottom, keeping the button pressed down.

    • CAUTION! The plastic opening tool may be used to gain leverage. Some force is required to open.

  2. Disassembling Nokia Classic 2600c-2b Phone: 2 단계, 이미지 1/1
    • Remove the back cover to expose the battery.

  3. Disassembling Nokia Classic 2600c-2b Phone: 3 단계, 이미지 1/2 Disassembling Nokia Classic 2600c-2b Phone: 3 단계, 이미지 2/2
    • Place a finger or plastic opening tool in the gap between the battery and the phone.

    • Gently lift the battery out.

  4. Disassembling Nokia Classic 2600c-2b Phone: 4 단계, 이미지 1/2 Disassembling Nokia Classic 2600c-2b Phone: 4 단계, 이미지 2/2
    • Locate the plastic latches on the left and right sides of the phone.

    • Insert the plastic opening tool or a fingernail into each latch and pry them open individually.

    • CAUTION! Some force is required.

  5. Disassembling Nokia Classic 2600c-2b Phone: 5 단계, 이미지 1/1
    • Remove the faceplate with the number pad attached.

  6. Disassembling Nokia Classic 2600c-2b Phone: 6 단계, 이미지 1/1
    • Turn the faceplate so the number pad faces downward.

    • Lift the number pad out of the faceplate.

  7. Disassembling Nokia Classic 2600c-2b Phone: 7 단계, 이미지 1/2 Disassembling Nokia Classic 2600c-2b Phone: 7 단계, 이미지 2/2
    • Locate the six screws positions along the edges of the motherboard.

    • Unscrew the six screws using the Torx 5 screwdriver (see Introduction for description of a Torx 5 screwdriver).

    • CAUTION! Place the screws in a secure location.

  8. Disassembling Nokia Classic 2600c-2b Phone: 8 단계, 이미지 1/2 Disassembling Nokia Classic 2600c-2b Phone: 8 단계, 이미지 2/2
    • Locate the orange ribbon tape connecting the metal display plate to the motherboard.

    • Lift the black latch attaching the tape to the motherboard.

    • Gently pull the tape out of the latch slot to remove the metal display.

  9. Disassembling Nokia Classic 2600c-2b Phone: 9 단계, 이미지 1/2 Disassembling Nokia Classic 2600c-2b Phone: 9 단계, 이미지 2/2
    • Using the plastic opening tool, gently pry off the motherboard from the plastic shell.

    • CAUTION! When pulling the motherboard out, be careful not to damage the battery under the lower left hand corner of the motherboard.

  10. Disassembling Nokia Classic 2600c-2b Phone: 10 단계, 이미지 1/1
    • Turn the motherboard over and locate the orange ribbon tape connecting the display to the motherboard.

    • Gently pull the tape up to remove the display.

  11. Disassembling Nokia Classic 2600c-2b Phone: 11 단계, 이미지 1/1
    • Locate the camera component in the plastic shell removed from underneath the motherboard (It is one piece).

    • Gently pull out the camera component using either a finger or plastic opening tool.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Ian VanZandt

회원 가입일: 02/14/12

654 평판

안내서 5개 작성하였습니다

James Madison, Team 3-1, Klein Spring 2012 James Madison, Team 3-1, Klein Spring 2012 회원

JMU-KLEIN-S12S3G1

3 회원들

안내서 9개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 1,244