Disassembling Olympus Stylus 1010 Logic Board - iFixit 수리 안내서

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

필요한 것

1 단계 Disassembling Olympus Stylus 1010 Case

Disassembling Olympus Stylus 1010 Logic Board, Disassembling Olympus Stylus 1010 Case: 1 단계, 이미지 1/2

Disassembling Olympus Stylus 1010 Logic Board, Disassembling Olympus Stylus 1010 Case: 1 단계, 이미지 2/2

Remove the five Phillips #00 bottom and right side panel screws.

2 단계

Disassembling Olympus Stylus 1010 Logic Board: 2 단계, 이미지 1/1

Remove the right side panel by pulling off the large silver piece.

3 단계

Disassembling Olympus Stylus 1010 Logic Board: 3 단계, 이미지 1/2

Disassembling Olympus Stylus 1010 Logic Board: 3 단계, 이미지 2/2

Remove the remaining three Phillips #00 side and front panel screws.

4 단계

Disassembling Olympus Stylus 1010 Logic Board: 4 단계, 이미지 1/1

Using your thumb and forefinger, pull off the silver name plate and silver "T-shape" piece.

5 단계

Disassembling Olympus Stylus 1010 Logic Board: 5 단계, 이미지 1/1

Remove the black front panel by sliding it towards the lens and then pulling it up off of the camera.

6 단계

Disassembling Olympus Stylus 1010 Logic Board: 6 단계, 이미지 1/3

Disassembling Olympus Stylus 1010 Logic Board: 6 단계, 이미지 2/3

Disassembling Olympus Stylus 1010 Logic Board: 6 단계, 이미지 3/3

Remove the three Phillips #00 screws from the front of the camera.
Using a spudger, lift the two tabs to separate the case—one tab on top and one tab on the right side.

7 단계

Disassembling Olympus Stylus 1010 Logic Board: 7 단계, 이미지 1/3

Disassembling Olympus Stylus 1010 Logic Board: 7 단계, 이미지 2/3

Disassembling Olympus Stylus 1010 Logic Board: 7 단계, 이미지 3/3

Using a plastic spudger, lift up the black clips.
Still using the plastic spudger, detach the gold connector strip and white connector strip.
Using both hands, pull the camera apart into two pieces.

8 단계 Lens

Disassembling Olympus Stylus 1010 Logic Board, Lens: 8 단계, 이미지 1/2

Disassembling Olympus Stylus 1010 Logic Board, Lens: 8 단계, 이미지 2/2

Using a plastic spudger, lift up the black clips.
Still using the spudger, detach the three gold wire tape connectors from the inside of the camera.

9 단계

Disassembling Olympus Stylus 1010 Logic Board: 9 단계, 이미지 1/1

Remove the three screws from the inside of the camera using a #00 screwdriver.

10 단계

Disassembling Olympus Stylus 1010 Logic Board: 10 단계, 이미지 1/2

Disassembling Olympus Stylus 1010 Logic Board: 10 단계, 이미지 2/2

Using your thumb and forefinger, pull the lens piece straight out from the body of the camera.

11 단계 Logic Board

Disassembling Olympus Stylus 1010 Logic Board, Logic Board: 11 단계, 이미지 1/1

Unscrew two screws on the right side of the camera using a #00 screwdriver.

12 단계

Disassembling Olympus Stylus 1010 Logic Board: 12 단계, 이미지 1/1

Using a plastic spudger, lift up the black clips.
Still using the spudger, detach the gold wire tape connectors from the logic board.

13 단계

Disassembling Olympus Stylus 1010 Logic Board: 13 단계, 이미지 1/1

Unsolder the upper right and lower left wires to remove logic board.

14 단계

Disassembling Olympus Stylus 1010 Logic Board: 14 단계, 이미지 1/2

Disassembling Olympus Stylus 1010 Logic Board: 14 단계, 이미지 2/2

In order to remove the logic board, grab each side of it and pull up using your thumb and forefinger.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 6명과 함께

Max McIntyre

회원 가입일: 01/21/11

526 평판

안내서 4개 작성하였습니다

배지 +7개 더

팀

Cal Poly, Team 13-4, Forte Winter 2011 Cal Poly, Team 13-4, Forte Winter 2011 회원

CPSU-FORTE-W11S13G4

6 회원들

안내서 12개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 6

전체 시간: 3,182