Remove the four rubber screw covers from encircled locations.
  • Remove the four rubber screw covers from encircled locations.

  • Using a #0 tri wing screwdriver, remove the screws previously hidden below the rubber covers.

  • If you have difficulties finding this screwdriver, it is commonly sold as a Nintendo Gameboy/Wii screwdriver.

댓글 쓰기

Pry the case open using iPhone tool (as shown), fingernails, small flathead screwdriver, etc.
  • Pry the case open using iPhone tool (as shown), fingernails, small flathead screwdriver, etc.

  • Be mindful of location and magnitude of applied force, so as not to damage the case.

댓글 쓰기

Unlock the minor LCD connector by applying bilateral pressure with tweezers, as shown.
  • Unlock the minor LCD connector by applying bilateral pressure with tweezers, as shown.

댓글 쓰기

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Use fingernails to pry off minor LCD mount, as shown.
  • Use fingernails to pry off minor LCD mount, as shown.

  • Remove the minor LCD

댓글 쓰기

Unlock the LCD main board connectors shown in red boxes on the picture .
  • Unlock the LCD main board connectors shown in red boxes on the picture .

  • Use tweezers as necessary.

댓글 쓰기

Place finger nails on the connector tab as shown.
  • Place finger nails on the connector tab as shown.

  • Lift the connector tab up.

댓글 쓰기

Pull/pivot the LCD main board as shown in order to remove.
  • Pull/pivot the LCD main board as shown in order to remove.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Van

회원 가입일: 2010년 06월 24일

7 평판

안내서 16개 작성하였습니다

Cal Poly, Team 2-10, Johann Summer 2010 Cal Poly, Team 2-10, Johann Summer 2010 회원

CPSU-JOHANN-R10S2G10

4 회원들

안내서 20개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,729