Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide)

djgodmandj 및 2 다른 기여자

최종 수정일 July 8, 2024

1 시간

매우 어려움

커뮤니티-기여 안내서

소개

1단계로 이동하기

After many requests, here is a video tutorial showing how to disassembly a PlayStation Vita's Screen & Digitizer from its front plastic frame assembly.

필요한 것

부품

Playstation Vita Screen and Digitizer Assembly

도구

동영상 개요

1 단계 Case Separation

Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Case Separation: 1 단계, 이미지 2개 중 1개

Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Case Separation: 1 단계, 이미지 2개 중 2개

Power off and remove the memory card.
Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

번역하기

2 단계

Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): 2 단계, 이미지 3개 중 3개

Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.
Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

번역하기

3 단계

Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

번역하기

4 단계

Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): 4 단계, 이미지 3개 중 3개

Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.
Continue working your way around the device gently prying it open.
There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

번역하기

5 단계

Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

번역하기

6 단계

Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

번역하기

7 단계

Free the battery cable by gently prying up on the connection with a spudger.

번역하기

8 단계

Separate the front and rear cases.

번역하기

9 단계 Battery

Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Battery: 9 단계, 이미지 2개 중 1개

Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide), Battery: 9 단계, 이미지 2개 중 2개

With the help of a spudger, gently pry off and remove the battery cable retainer on the back casing assembly.
The easiest access to the battery cable retainer is where the battery cable comes out.
You can also use the two small tabs on the side of the cable retainer. Locate the tabs and release one at a time. Be a little careful not to push the cover in and re-lock it.

번역하기

10 단계

Using a Phillips #00 screwdriver, remove the two 5.0mm blue battery case screws.
Remove the plastic battery retaining bar.

번역하기

11 단계

Disassembling PlayStation Vita Screen & Digitizer (Video Tutorial/Guide): 11 단계, 이미지 3개 중 3개

Using your finger or a spudger, lift the battery out and remove it.
Guide the battery wires through the hole in the back casing as you remove the battery.

번역하기