소개

How to replace the LCD screen if it is broken or cracked.

부품

부품은 필요하지 않습니다.

  1. Locate the battery cover on the bottom of the camera.
    • Locate the battery cover on the bottom of the camera.

  2. Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.
    • Place your thumb on the battery cover and push towards the arrow. The cover will release and pop open.

    • Remove the batteries from the camera.

    • Unscrew and remove four (3mm) screws on the right side of the camera. This will release the front and back casings.

    • Use your nail or a flat object to pry up the edge of the front casing. Push the casing up and back.

    • Repeat this step for the back casing.

    • Locate the black plastic strip under the screen above the white plastic strip.

    • Pull up both sides of the black piece up about a mm.

    • The black plastic piece is not meant to come all the way off, just enough to release the screen.

    • Once the piece is lifted carefully slide the screen out of the slot.

결론

To reassemble your device, follow these instructions in reverse order.

Dani

회원 가입일: 2010년 06월 24일

21 평판

안내서 7개 작성하였습니다

Cal Poly, Team 3-3, Johann Summer 2010 Cal Poly, Team 3-3, Johann Summer 2010 회원

CPSU-JOHANN-R10S3G3

2 회원들

안내서 7개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 1,521