주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Disassembling Rival 16131 Toaster Shell

필요한 것

  1. Disassembling Rival 16131 Toaster Shell, Shell Removal: 1 단계, 이미지 1/2 Disassembling Rival 16131 Toaster Shell, Shell Removal: 1 단계, 이미지 2/2
    • Make sure the toaster is unplugged before starting.

    • Turn the toaster upside down and remove the rubber feet.

  2. Disassembling Rival 16131 Toaster Shell: 2 단계, 이미지 1/2 Disassembling Rival 16131 Toaster Shell: 2 단계, 이미지 2/2
    • Using a #2 Phillips head screwdriver, remove the four 12mm screws that attach the toaster shell.

  3. Disassembling Rival 16131 Toaster Shell: 3 단계, 이미지 1/3 Disassembling Rival 16131 Toaster Shell: 3 단계, 이미지 2/3 Disassembling Rival 16131 Toaster Shell: 3 단계, 이미지 3/3
    • With the dial facing you, push the toaster base up and away until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster.

    • When reassembling the toaster, make sure that the back of the dial lines up with the slot both in position and orientation (the dial and slot are not perfect circles - they have a notch).

    • The only object holding the shell onto the toaster now is the grey part of the lever.

  4. Disassembling Rival 16131 Toaster Shell: 4 단계, 이미지 1/1
    • Reach under the shell and grab the back, white part of the lever.

    • Grab the grey lever between your index finger and your middle finger and pull.

    • Pulling too hard will break the mechanism that holds the grey handle onto the white lever.

    • Remove the shell.

결론

To reassemble your device, follow these instructions in reverse order.

다른 9명이 해당 안내서를 완성하였습니다.

Naomi Willis

회원 가입일: 09/26/12

80 평판

안내서 1개 작성함

Cal Poly, Team 2-8, Propen Fall 2012 Cal Poly, Team 2-8, Propen Fall 2012 회원

CPSU-PROPEN-F12S2G8

5 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 11

전체 시간: 3,840