Disassembling SKIL 4235 Jigsaw Base plate - iFixit 수리 안내서

소개

This guide is to remove the base plate. This will allow you to access the rest of your saw and disassemble it properly.

필요한 것

1 단계 Disassembling SKIL 4235 Jigsaw Base plate

Disassembling SKIL 4235 Jigsaw Base plate, Disassembling SKIL 4235 Jigsaw Base plate: 1 단계, 이미지 1/3

Disassembling SKIL 4235 Jigsaw Base plate, Disassembling SKIL 4235 Jigsaw Base plate: 1 단계, 이미지 2/3

Disassembling SKIL 4235 Jigsaw Base plate, Disassembling SKIL 4235 Jigsaw Base plate: 1 단계, 이미지 3/3

Orient your saw so that the blade is pointing in the opposite direction of your body. Ensure that the screws circled are visible and pointing skyward. This will be the standard position of the Jigsaw for the duration of this guide.

2 단계

Disassembling SKIL 4235 Jigsaw Base plate: 2 단계, 이미지 1/1

Using two hands grip both side of the saw and lay on side.

3 단계

Disassembling SKIL 4235 Jigsaw Base plate: 3 단계, 이미지 1/1

With bottom of the base plate visible, identify one M4 screw circled in red and remove with Phillips screwdriver (some models have flathead screw, as pictured, and require flathead screwdriver).

4 단계

Disassembling SKIL 4235 Jigsaw Base plate: 4 단계, 이미지 1/1

After removing M4 screw, remove the base plate and place to the side. Don't forget to replace the M4 screw near the base plate during re-installation.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Adam Cardoso

회원 가입일: 11/12/13

357 평판

안내서 3개 작성하였습니다

배지 +3개 더

팀

UMass Dartmouth, Team 4-8, Vijaybhaskar Fall 2013 UMass Dartmouth, Team 4-8, Vijaybhaskar Fall 2013 회원

UMASSD-VIJAYBHASKAR-F13S4G8

3 회원들

안내서 3개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 23

전체 시간: 2,970