How to remove the screen.

  1. Push open the latch and remove the battery.
    • Push open the latch and remove the battery.

  2. Twist off the antenna.
    • Twist off the antenna.

    • Pop off the transparent cylinder.

    • Remove the five screws as shown.

    • Carefully pry the back plate off.

    • Carefully detach golden screen connector.

    • Pop out the logic board with spudger.

    • Caution: Do not touch with bare hands, use tweezers or wash hands before contact.

    • Place the logic board on a clean tray.

    • Remove the hinge on the phone.

      • Put pressure on the spring with the screwdriver to unhinge phone.

    • Make sure to pull the gold wire through, don't let it rip.

    • Remove the four screws as shown

    • Use the spudger to pry it open, excessive force may be necessary.

    • Remove the three screws that hold the big speaker

      • Caution: The wires are attached to the screen and should be removed with care.

    • Remove the three screws as shown.

    • Pull off the metal bracket.

    • Use the spudger to pop off the screen.

      • Pop off the Microphone/Speaker as well.

    • Place all of the components on a clean tray and clean environment.


To reassemble your device, follow these instructions in reverse order.


Member since: 04/19/2010

25 Reputation

6 Guides authored


Cal Poly, Team 10-43, Garner Spring 2010 Member of Cal Poly, Team 10-43, Garner Spring 2010


5 Members

12 Guides authored


View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 2

All Time: 1,790