주요 콘텐츠로 건너뛰기

소개

My autofocus bearings were stopped, I could focus only between min to 0.5m. This will show how to reach a part which moves the lens and makes it to zoom and focus.

Done by Rimvydas Gudeliauskas

부품

지정된 부품이 없습니다.

  1. Camera lens are delicate and intricate. Be careful with the disassembly and work slowly.
    • Camera lens are delicate and intricate. Be careful with the disassembly and work slowly.

    • Take the lens away from camera

    • DO NOT FORGET: THAT YOU ARE DOING ALL ON YOUR OWN RESPONSIBILITY

  2. Unscrew the top part and detach it. Unjoin cables. Be careful; they're delicate, and easily torn.
    • Unscrew the top part and detach it.

    • Unjoin cables. Be careful; they're delicate, and easily torn.

    • Try to avoid contact with the sensitive electronic components.

    • Unfasten the screws that hold the circuit board in place, and separate it from the rest of the lens assembly.

  3. Take away zoom rubber and you will find srews
    • Take away zoom rubber and you will find srews

  4. Just take parts you need until you reach what you want to fix Zoom bearing can be taken away by unscrewing its srews.
    • Just take parts you need until you reach what you want to fix

    • Zoom bearing can be taken away by unscrewing its srews.

  5. Here is one of the parts which was broken, so I go to camera repair shop, and bought that parts. As this was not the only part broken, I had to leave for additional repair.
    • Here is one of the parts which was broken, so I go to camera repair shop, and bought that parts. As this was not the only part broken, I had to leave for additional repair.

    • When you finish you can put all back together

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Rimvydas

회원 가입일: 2012년 03월 29일

296 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 23

30일 전: 104

전체 시간: 26,079