부품

부품은 필요하지 않습니다.

  1. Remove the battery (which also functions as the back cover) from the device. This step is not explicitly shown, but a picture without the battery cover shows the device post-battery removal.
    • Remove the battery (which also functions as the back cover) from the device. This step is not explicitly shown, but a picture without the battery cover shows the device post-battery removal.

    댓글 쓰기

  2. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
  3. Use a Philip's head screw driver to remove the screws from the case.
    • Use a Philip's head screw driver to remove the screws from the case.

    • Place the screws in a small container to avoid losing them.

    댓글 쓰기

    • Remove the front cover.

      • First, insert a small pry bar where the black front cover and white back cover meet.

      • Begin prying the black plastic up, slowing moving around to the bottom and other side.

      • At an angle, carefully pull up on the front cover separate the two pieces.

    • Excellent! Now you have removed the front cover!

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Trey

회원 가입일: 2012년 03월 09일

80 평판

안내서 2개 작성하였습니다

Clemson, Team 2-1, Benson Spring 2012 Clemson, Team 2-1, Benson Spring 2012 회원

CLEM-BENSON-S12S2G1

3 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 4

전체 시간: 1,423