소개

The front housing includes the motor, the chuck, and the gears. There's a good chance that whatever needs to be replaced will be found in here.

부품

부품은 필요하지 않습니다.

  1. On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.
    • On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.

  2. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. Pull the front housing apart from the rear. The motor and gears might fall out when you are pulling it apart.
    • Pull the front housing apart from the rear.

    • The motor and gears might fall out when you are pulling it apart.

결론

To reassemble your device, follow these instructions in reverse order.

Matt

회원 가입일: 2010년 10월 10일

365 평판

안내서 7개 작성하였습니다

Cal Poly, Team 5-17, Maness Fall 2010 Cal Poly, Team 5-17, Maness Fall 2010 회원

CPSU-MANESS-F10S5G17

3 회원들

안내서 7개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 92