소개

This a simple process requiring only a small Phillips screwdriver and a slim flathead.

Note: A few trays for the screws, a wristband and an anti-static surface mat are ideal for safe handling of sensitive electronics.

- Remove battery.
  • - Remove battery.

  • - Remove memory tray door (1 Screw).

  • - Remove hard drive door (1 Screw).

  • - Remove hard drive (3 Screws).

댓글 쓰기

- Remove all screws from the bottom cover. There are three types of screws. Marked here with Red Circles, Red Squares and Orange Circles.
  • - Remove all screws from the bottom cover. There are three types of screws. Marked here with Red Circles, Red Squares and Orange Circles.

댓글 쓰기

  • - Remove CD/DVD Drive by sliding it out.

  • - Remove three more screws, which were hiding under the DVD drive.

댓글 쓰기

  • - Carefully remove the cover, by unpopping it with a slim flathead, slide it out away from the RJ-45, HDMI and VGA ports.

댓글 쓰기

  • - The audio/usb interface card is now within reach. Just remove the two screws and carefully slide out the flat connector to remove the card.

댓글 쓰기

  • - Fire up the air compressor and blow out dust from the fan and heatsinks.

댓글 쓰기

  • - If you are replacing your RAM, simply unpop the four latches and slide out the memory sticks.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Artem Nikulkov

회원 가입일: 2010년 10월 22일

232 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 3

지난 30일: 47

전체 시간: 20,378