주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

부품

지정된 부품이 없습니다.

  1. Flip the toy over, so that the keypad is facing away from you. Remove two Phillips-head screws.
    • Flip the toy over, so that the keypad is facing away from you.

    • Remove two Phillips-head screws.

    • Insert a plastic spudger (or 4!) into the marked holes, and push down and towards the edge to release each catch.

    • It's possible to release each catch one-at-a-time, but easier if you have 4 tools and do them simultaneously.

    • This requires quite a bit of force; be careful.

  2. Separate the two halves of the case to expose the inner PCB, speaker and battery holder.
    • Separate the two halves of the case to expose the inner PCB, speaker and battery holder.

결론

To reassemble your device, follow these instructions in reverse order.

bushing

회원 가입일: 2010년 04월 23일

9,990 평판

안내서 13개 작성하였습니다

I got one of these. I've opened the case and the battery connections are silver and show no corrosion at all. I replaced the batteries, swapped out one of the Word Modules. I got a bit of static once, but now nothing. All the wire connection soldering looks fine. Any ideas?

stevehelium@gmail.com

Stephen Henderson - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 13

전체 시간: 4,053