기기를 수리하세요 커뮤니티 상점

Disassembling Speak And Spell Case

필요한 것

  1. Disassembling Speak And Spell Case, Case: 1 단계, 이미지 1/2 Disassembling Speak And Spell Case, Case: 1 단계, 이미지 2/2

    • Flip the toy over, so that the keypad is facing away from you.

    • Remove two Phillips-head screws.

    • Insert a plastic spudger (or 4!) into the marked holes, and push down and towards the edge to release each catch.

    • It's possible to release each catch one-at-a-time, but easier if you have 4 tools and do them simultaneously.

    • This requires quite a bit of force; be careful.

    번역하기

  3. Disassembling Speak And Spell Case: 2 단계, 이미지 1/1

    • Separate the two halves of the case to expose the inner PCB, speaker and battery holder.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

bushing

회원 가입일: 04/23/10

10,247 평판

안내서 13개 작성하였습니다

배지: 43

배지 +40개 더

댓글 한 개

I got one of these. I've opened the case and the battery connections are silver and show no corrosion at all. I replaced the batteries, swapped out one of the Word Modules. I got a bit of static once, but now nothing. All the wire connection soldering looks fine. Any ideas?

stevehelium@gmail.com

Stephen Henderson - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 14

전체 시간: 4,960