기기를 수리하세요 커뮤니티 상점

Disassembling VTech MobiGo Touch Learning System Keyboard

소개

This is a step by step guide to show how to replace the keyboard. Prior to this guide, you will need to refer to the Disassembling guide for the case.

필요한 것

  1. Disassembling VTech MobiGo Touch Learning System Keyboard, Case: 1 단계, 이미지 1/1

    • Remove the battery covers and the four batteries.

    편집

  2. Disassembling VTech MobiGo Touch Learning System Keyboard: 2 단계, 이미지 1/2 Disassembling VTech MobiGo Touch Learning System Keyboard: 2 단계, 이미지 2/2

    • Remove the four plastic caps with a metal spudger to expose the 6.0 mm Philips JIS #0 case screws.

    • Remove the eight 6.0 mm JIS #0 case screws.

    편집

  3. Disassembling VTech MobiGo Touch Learning System Keyboard: 3 단계, 이미지 1/2 Disassembling VTech MobiGo Touch Learning System Keyboard: 3 단계, 이미지 2/2

    • Using a plastic opening tool, separate the two pieces of the case carefully.

    편집

  4. Disassembling VTech MobiGo Touch Learning System Keyboard, Disassembling VTech MobiGo Touch Learning System Keyboard: 4 단계, 이미지 1/2 Disassembling VTech MobiGo Touch Learning System Keyboard, Disassembling VTech MobiGo Touch Learning System Keyboard: 4 단계, 이미지 2/2

    • Remove the six 6.5 mm Philips J0 screws that are connected to the circuit board.

    • Use light pressure to prevent damage to the circuit board.

    편집

  6. Disassembling VTech MobiGo Touch Learning System Keyboard: 5 단계, 이미지 1/1

    • Remove the 9.0 mm Philips J0 screw from the blue plastic cover.

    • Once the screw is removed, remove the blue plastic cover.

    편집

  7. Disassembling VTech MobiGo Touch Learning System Keyboard: 6 단계, 이미지 1/2 Disassembling VTech MobiGo Touch Learning System Keyboard: 6 단계, 이미지 2/2

    • Remove the two 4.0 mm Philips J0 screws located on the orange case.

    • Use gentle force to prevent stripping of screws.

    편집

  8. Disassembling VTech MobiGo Touch Learning System Keyboard: 7 단계, 이미지 1/3 Disassembling VTech MobiGo Touch Learning System Keyboard: 7 단계, 이미지 2/3 Disassembling VTech MobiGo Touch Learning System Keyboard: 7 단계, 이미지 3/3

    • Remove the two "L" shaped brackets located on both sides of the device.

    • Use the magnetic mat to store these brackets.

    편집

  9. Disassembling VTech MobiGo Touch Learning System Keyboard: 8 단계, 이미지 1/1

    • Locate the spring that was connected to the "L" shaped bracket and slowly remove it.

    편집

  10. Disassembling VTech MobiGo Touch Learning System Keyboard: 9 단계, 이미지 1/2 Disassembling VTech MobiGo Touch Learning System Keyboard: 9 단계, 이미지 2/2

    • Gently lift the circuit board from the case using a plastic opening tool.

    • Make sure to use a plastic opening tool for this step.

    편집

  11. Disassembling VTech MobiGo Touch Learning System Keyboard: 10 단계, 이미지 1/1

    • Remove the 3.5 mm Philips J0 screw located underneath the circuit board.

    • Keep the circuit board out of the way to avoid damaging it.

    편집

  12. Disassembling VTech MobiGo Touch Learning System Keyboard: 11 단계, 이미지 1/1

    • Slowly remove the keyboard panel.

    • Use a spudger if necessary.

    • The keys will fall out once the keyboard panel is removed.

    • Remove all of the keys and set them aside with the keyboard panel.

    편집

  13. Disassembling VTech MobiGo Touch Learning System Keyboard: 12 단계, 이미지 1/1

    • Gently remove the keyboard circuit board with a plastic opening tool.

    편집

    Where do you get a replacement circuit board?

    Kara - 답글

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 5명과 함께

RBansil

회원 가입일: 08/27/15

221 평판

안내서 2개 작성하였습니다

배지: 6

배지 +3개 더

팀

USF Tampa, Team 8-3, Eyestone Fall 2015 USF Tampa, Team 8-3, Eyestone Fall 2015 회원

USFT-EYESTONE-F15S8G3

3 회원들

안내서 17개 작성하였습니다

댓글 한 개

Was gifted a mobigo2 for my niece but it came without keyboard .. I was curious if you knew where I might find a replacement keyboard?

ROXXY - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 12

전체 시간: 1,754