이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.
필요한 것
-
-
-
Slide out the hard drive as shown in the picture
-
-
-
Remove the 4 rubber piece from the plastic frame at each corner.
-
-
-
Remove both screws holding the retaining plate and the hard drive.
-
Slide the retaining plate in order to disconnect the SATA connector.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.