소개

This guide is a prerequisite for replacing other parts of an Xbox 360 E.

부품

부품은 필요하지 않습니다.

  1. Push the Spudger into the crevice between the grated top panel of the Xbox and the bottom body with the rubber feet.
    • Push the Spudger into the crevice between the grated top panel of the Xbox and the bottom body with the rubber feet.

    • Pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

    댓글 쓰기

  2. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
  3. Slide the spudger along the separation you have created between the grated panel and the bottom body of the Xbox.
    • Slide the spudger along the separation you have created between the grated panel and the bottom body of the Xbox.

    • Periodically pull back on the spudger like a lever, keeping it pressed firmly into the crevice.

    댓글 쓰기

    • Continue sliding the spudger along the perimeter of the left grated face of the Xbox.

    • Pull the top panel off.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Jennifer

회원 가입일: 2014년 02월 02일

1,513 평판

안내서 4개 작성하였습니다

Cal Poly, Team 2-11, Amido Winter 2014 Cal Poly, Team 2-11, Amido Winter 2014 회원

CPSU-AMIDO-W14S2G11

4 회원들

안내서 11개 작성하였습니다

I broke my spudger! May I use anything besides that?

Colin2 Schrek - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 9

전체 시간: 1,144