소개

Removing the face plate is necessary for most repairs to this device. Removing the face plate is a relatively simple process, requiring only the removal of several screws.

부품

부품은 필요하지 않습니다.

  1. Turn the keyboard over so that the keys are facing the ground.
    • Turn the keyboard over so that the keys are facing the ground.

    댓글 쓰기

  2. Pop the tabs on the battery casing and remove it from the back plate.
    • Pop the tabs on the battery casing and remove it from the back plate.

    댓글 쓰기

    • Locate the six batteries and remove them from the battery cavity.

    what type of batteries? and how much ?

    thanks godbless

    colladonelson - 답글

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Remove the six 10mm screws at the top of the backplate.

    댓글 쓰기

    • Remove the seven 12mm screws in the middle of the back plate.

    댓글 쓰기

    • Remove the eight 10mm screws from the side and the bottom of the back plate.

    댓글 쓰기

    • As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.

    • Flip over the keyboard

    댓글 쓰기

    • Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.

      • Be careful when removing the face plate. There are wires attached.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Lonnie Bissmeyer

회원 가입일: 2012년 09월 16일

300 평판

안내서 4개 작성하였습니다

Cal Poly, Team 2-62, Propen Fall 2012 Cal Poly, Team 2-62, Propen Fall 2012 회원

CPSU-PROPEN-F12S2G62

2 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 3

전체 시간: 1,189