기기를 수리하세요 커뮤니티 상점

Disassembling the Garmin eTrex Vista-H Outer Case

소개

This guide will allow you how to access the internal components of the device.

필요한 것

  1. Disassembling the Garmin eTrex Vista-H Outer Case, Removing Battery: 1 단계, 이미지 1/1

    • Flip the device to the backside, and locate the metal tab at the center of the back cover.

    번역하기

  2. Disassembling the Garmin eTrex Vista-H Outer Case: 2 단계, 이미지 1/1

    • Lift the metal tab up, and rotate it counterclockwise. This will unlock the back case cover.

    번역하기

  3. Disassembling the Garmin eTrex Vista-H Outer Case: 3 단계, 이미지 1/2 Disassembling the Garmin eTrex Vista-H Outer Case: 3 단계, 이미지 2/2

    • Lift the battery plate off to either insert or remove 2 AA batteries.

    번역하기

  5. Disassembling the Garmin eTrex Vista-H Outer Case, Disassembling the Garmin eTrex Vista-H Outer Case: 4 단계, 이미지 1/2 Disassembling the Garmin eTrex Vista-H Outer Case, Disassembling the Garmin eTrex Vista-H Outer Case: 4 단계, 이미지 2/2

    • With the wedge side of a spudger (or a small, flat head screwdriver), remove the black rubber case support from the device body.

    번역하기

  6. Disassembling the Garmin eTrex Vista-H Outer Case: 5 단계, 이미지 1/3 Disassembling the Garmin eTrex Vista-H Outer Case: 5 단계, 이미지 2/3 Disassembling the Garmin eTrex Vista-H Outer Case: 5 단계, 이미지 3/3

    • With the pick side of a spudger (or tweezers), peel the sticky tape from the device.

    번역하기

  7. Disassembling the Garmin eTrex Vista-H Outer Case: 6 단계, 이미지 1/1

    • Split the front and rear panels by inserting a small pointed tool (such as a pen point or a screwdriver tip SL1.5) in the 5 plastic tabs along the sides of the device.

    • Do not remove the back panels quickly. If too much force is applied, there is a wire connection that will break.

    • CAUTION! Be careful not to force the tabs inward. This will result in broken tabs.

    번역하기

  8. Disassembling the Garmin eTrex Vista-H Outer Case: 7 단계, 이미지 1/2 Disassembling the Garmin eTrex Vista-H Outer Case: 7 단계, 이미지 2/2

    • With tweezers (or your fingernails), carefully disconnect the wires between the PC input and the motherboard.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 7명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 7명과 함께

Ryan Green

회원 가입일: 10/17/10

93 평판

안내서 1개 작성함

배지: 8

배지 +5개 더

팀

Cal Poly, Team 21-30, Regan Fall 2010 Cal Poly, Team 21-30, Regan Fall 2010 회원

CPSU-REGAN-F10S21G30

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 4,982