기기를 수리하세요 커뮤니티 상점

Dismantle Nespresso CitiZ

소개

For many repairs the CitiZ must be opened, this is shown here.

필요한 것

  1. Dismantle Nespresso CitiZ, Dismantle Nespresso CitiZ: 1 단계, 이미지 1/1

    • Never forget: pull the plug!

    • Remove all attachments: Water tank, capsule and cup drawer, drip tray.

    • The model shown is also equipped with a milk frother, remove that too.

    번역하기

  2. Dismantle Nespresso CitiZ: 2 단계, 이미지 1/2 Dismantle Nespresso CitiZ: 2 단계, 이미지 2/2
    이 단계에 사용된 도구:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    구매

    • The bottom is secured by oval head screws.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Nespresso wants to keep us out of our own machines!!!

    • Remove five oval head screws securing the large bottom panel.

    • Note: this panel is smaller on models without milk frother.

    번역하기

  3. Dismantle Nespresso CitiZ: 3 단계, 이미지 1/3 Dismantle Nespresso CitiZ: 3 단계, 이미지 2/3 Dismantle Nespresso CitiZ: 3 단계, 이미지 3/3

    • The bottom panel is just snapped into place. Insert a metal spudger into the slots and lift the panel out. It sits quite tightly and you might use some force to get it out.

    번역하기

  5. Dismantle Nespresso CitiZ: 4 단계, 이미지 1/1

    • Remove the large bottom panel.

    번역하기

  6. Dismantle Nespresso CitiZ: 5 단계, 이미지 1/1

    • Use a spudger to slide off the two silicon tubes.

    번역하기

  7. Dismantle Nespresso CitiZ: 6 단계, 이미지 1/2 Dismantle Nespresso CitiZ: 6 단계, 이미지 2/2

    • Disconnect the two spade plugs on the blue and brown wires from the power switch. The two left ones remain.

    번역하기

  8. Dismantle Nespresso CitiZ: 7 단계, 이미지 1/1

    • Remove four oval head screws from the small bottom panel.

    • Remove the main device from the base. It´s still connected with some wires, but this doesn´t bother much.

    번역하기

  9. Dismantle Nespresso CitiZ: 8 단계, 이미지 1/3 Dismantle Nespresso CitiZ: 8 단계, 이미지 2/3 Dismantle Nespresso CitiZ: 8 단계, 이미지 3/3

    • The two colored side panels are only snapped into place. However, the latches sit very tight. You really need a lot of force. First lift the lower edge using a plastic opening tool.

    • Depending from the model it might help, when you first pry off the coffee spout. (See next step)

    • Unfold each of the side panels upwards and remove them.

    번역하기

  10. Dismantle Nespresso CitiZ: 9 단계, 이미지 1/1

    • Insert a opening tool in the gap on the bottom of the coffee spout. Pry it off carefully.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

다음 번역가들에게 특별히 감사 드립니다:

de en

100%

VauWeh

VauWeh님은 저희가 세상을 수리하는데 동참하신 분입니다! 기여하시겠습니까?
번역 시작하기 ›

작성자

다른 기여자 1명과 함께

VauWeh

회원 가입일: 10/19/15

202,382 평판

안내서 246개 작성하였습니다

배지: 44

배지 +41개 더

팀

Repair is War on Entropy Repair is War on Entropy 회원

Community

25 회원들

안내서 1,103개 작성하였습니다

댓글 2개

Wie geht es weiter um an die Heizung zu kommen? Vermutlich ist eine Reperatur nicht möglich.

Martin Gastberger - 답글

Ich denke der Teardown zeigt es: Nespresso CitiZ Teardown

VauWeh -

댓글 쓰기

조회 통계:

24 시간 전: 30

7일 전: 142

30일 전: 592

전체 시간: 9,493