기기를 수리하세요 커뮤니티 상점

Dymo LabelManager 280 Rear Case Replacement

소개

This guide is suppose to help you open up the device. Do not do this unless certain that you need to check something.

필요한 것

  1. Dymo LabelManager 280 Rear Case Replacement, Rear Case: 1 단계, 이미지 1/2 Dymo LabelManager 280 Rear Case Replacement, Rear Case: 1 단계, 이미지 2/2

    • Remove battery.

    • Remove the label cassette.

    편집

  3. Dymo LabelManager 280 Rear Case Replacement: 2 단계, 이미지 1/2 Dymo LabelManager 280 Rear Case Replacement: 2 단계, 이미지 2/2

    • Remove the 6 screws in the indicated places. These particular screws are 2mm x 8mm Phillips #0 head

    편집

  4. Dymo LabelManager 280 Rear Case Replacement: 3 단계, 이미지 1/2 Dymo LabelManager 280 Rear Case Replacement: 3 단계, 이미지 2/2

    • Use the spudger to take apart the device by insterting it as shown in the picture and twisting it. This should be done all around the device to ensure the two parts split correctly.

    • The keys/buttons highlighted in the second picture fall out easily so be careful. Keep device faced down in order to keep them from falling.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Steven Nguyen

회원 가입일: 02/08/16

431 평판

안내서 3개 작성하였습니다

배지: 11

배지 +8개 더

팀

USF Tampa, Team 6-5, Eyestone Spring 2016 USF Tampa, Team 6-5, Eyestone Spring 2016 회원

USFT-EYESTONE-S16S6G5

3 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 6

전체 시간: 537