기기를 수리하세요 커뮤니티 상점

Dynex DX-WBRDVD1 Top Cover Replacement

소개

This is the guide to crack into your device, almost every repair guide will need this completed first before being able to tear into the hardware below.

필요한 것

  1. Dynex DX-WBRDVD1 Top Cover Replacement, Top Cover: 1 단계, 이미지 1/2 Dynex DX-WBRDVD1 Top Cover Replacement, Top Cover: 1 단계, 이미지 2/2

    • Remove the four 5mm Phillips #1 screws that connect the black outer shell to the silver back of the device.

    편집

  3. Dynex DX-WBRDVD1 Top Cover Replacement: 2 단계, 이미지 1/1

    • Remove the two 5mm screws on the left and right side panels.

    • There is one screw on each side that secures the cover to the body of the device.

    편집

  4. Dynex DX-WBRDVD1 Top Cover Replacement: 3 단계, 이미지 1/1

    • Lift the black cover to a 45 degree angle from the rear of the device and pull the cover away entirely.

    • Check that the power cord is not preventing the device from opening or closing.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 9명과 함께

Caleigh Firth

회원 가입일: 04/05/18

438 평판

안내서 3개 작성하였습니다

배지: 11

배지 +8개 더

팀

Linn Benton Community College, Team S1-G2, Johnson Spring 2018 Linn Benton Community College, Team S1-G2, Johnson Spring 2018 회원

LBCC-JOHNSON-S18S1G2

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 5

전체 시간: 140