주요 콘텐츠로 건너뛰기

Dyson DC28 Animal Wheel Replacement

필요한 것

  1. Dyson DC28 Animal Wheel Replacement, Wheel: 1 단계, 이미지 1/1
    • Flip the vacuum face down with the wheels facing up.

  2. Dyson DC28 Animal Wheel Replacement: 2 단계, 이미지 1/1
    • Start on the right side wheel of the vacuum cleaner

    • Remove the plastic wheel cap by sliding the tip of the metal spudger under the edge of the cap.

    • Gently pry off the plastic cap

  3. Dyson DC28 Animal Wheel Replacement: 3 단계, 이미지 1/3 Dyson DC28 Animal Wheel Replacement: 3 단계, 이미지 2/3 Dyson DC28 Animal Wheel Replacement: 3 단계, 이미지 3/3
    • Identify the e-clip located under the metal axle.

    • The e-clip is very small and may be hard to identify. It is a small metal ring between the metal axle and the plastic wheel.

    • Use the metal spudger to pry off the e-clip.

    • The e-clip is hard to remove and may require extra force.

  4. Dyson DC28 Animal Wheel Replacement: 4 단계, 이미지 1/2 Dyson DC28 Animal Wheel Replacement: 4 단계, 이미지 2/2
    • Slide off the plastic wheel off of the metal axle

    • Be careful when removing plastic wheel. There is a loose metal washer and black axle piston behind the wheel that can easily fall off.

    • Slide off the metal washer and black axle piston from the metal axle

  5. Dyson DC28 Animal Wheel Replacement: 5 단계, 이미지 1/1
    • Remove the metal axle by pulling on the left wheel. This does not take a lot of force and should easily slide out.

    • Repeat steps 2, 3, and 4 to remove the left side wheel from the metal axle.

결론

To reassemble your device, follow these instructions in reverse order.

Zachary Urciuoli

회원 가입일: 01/27/17

101 평판

안내서 1개 작성함

Cal Poly, Team 21-4, Maness Winter 2017 Cal Poly, Team 21-4, Maness Winter 2017 회원

CPSU-MANESS-W17S21G4

5 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 8

전체 시간: 2,984