기기를 수리하세요 커뮤니티 상점

Ecovacs Deebot 900 Bottom Case Replacement

소개

In order to repair any of the internal components of the Ecovacs Deebot 900, the bottom cover must be removed. This will be a required step for repairing anything inside of the robot and must be completed first, so use this guide to open the Ecovacs 900 Deebot.

필요한 것

  1. Ecovacs Deebot 900 Bottom Case Replacement, Battery: 1 단계, 이미지 1/1

    • Remove all the brushes from the Deebot.

    편집

  2. Ecovacs Deebot 900 Bottom Case Replacement: 2 단계, 이미지 1/1

    • Using a Phillips #0 screwdriver, remove the two 12.25 mm screws holding the battery cover in place.​

    편집

  3. Ecovacs Deebot 900 Bottom Case Replacement: 3 단계, 이미지 1/1

    • Remove the battery cover.

    편집

  4. Ecovacs Deebot 900 Bottom Case Replacement: 4 단계, 이미지 1/1

    • Using the two white straps on the sides of the battery, gently remove the battery. ​

    • Be careful not to rip out the battery cable.

    편집

  6. Ecovacs Deebot 900 Bottom Case Replacement: 5 단계, 이미지 1/1

    • Carefully disconnect the battery cable by pulling near the connector at the bottom of the battery compartment.

    편집

  7. Ecovacs Deebot 900 Bottom Case Replacement, Front Bumper: 6 단계, 이미지 1/2 Ecovacs Deebot 900 Bottom Case Replacement, Front Bumper: 6 단계, 이미지 2/2

    • Using a Phillips #00 screwdriver, remove the eight screws on the bottom edge of the bumper. ​

    편집

  8. Ecovacs Deebot 900 Bottom Case Replacement: 7 단계, 이미지 1/1

    • Remove the black strip on the bottom of the bumper.

    편집

  9. Ecovacs Deebot 900 Bottom Case Replacement: 8 단계, 이미지 1/2 Ecovacs Deebot 900 Bottom Case Replacement: 8 단계, 이미지 2/2

    • Carefully lift up the bumper untill it pops out of place.​

    편집

  10. Ecovacs Deebot 900 Bottom Case Replacement: 9 단계, 이미지 1/2 Ecovacs Deebot 900 Bottom Case Replacement: 9 단계, 이미지 2/2

    • Disconnect the two cables connecting the bumper to the body of the Deebot.

    • Remove the front bumper from the device.

    편집

  11. Ecovacs Deebot 900 Bottom Case Replacement, Bottom Case: 10 단계, 이미지 1/2 Ecovacs Deebot 900 Bottom Case Replacement, Bottom Case: 10 단계, 이미지 2/2

    • Using a Phillips #00 screwdriver, take out the six screws around the perimeter of the bottom case.

    편집

  12. Ecovacs Deebot 900 Bottom Case Replacement: 11 단계, 이미지 1/2 Ecovacs Deebot 900 Bottom Case Replacement: 11 단계, 이미지 2/2

    • Insert a Jimmy into the seam and work all the way around the robot.

    • Disconnect the two cables and remove the bottom case from the device.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Christina Corliss

회원 가입일: 01/16/20

730 평판

안내서 3개 작성하였습니다

배지: 17

배지 +14개 더

팀

Embry-Riddle Aeronautical University, Team S6-G1, Rauch Spring 2020 Embry-Riddle Aeronautical University, Team S6-G1, Rauch Spring 2020 회원

ERAU-RAUCH-S20S6G1

3 회원들

안내서 17개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 32

전체 시간: 2,280